Clip on Knitted Wire Mesh RFI/EMI Shielding Gasket Strip

24 June 2019

Clip on knitted wire mesh gasket strip provides a good RFI / EMI shield for enclosures and electrical cabinets. The […]

Read More

EMI Fan Vents – Kemvent

16 October 2018

A range of low-cost plastic EMI vents for use with standard fan sizes 40mm, 60mm, 80mm, 92mm and 120mm. They […]

Read More

Ferrites for EMI Suppression

17 July 2018

Nickel zinc ferrite parts are used extensively in the suppression of electromagnetic interference commonly known as EMI. Ferrite materials exhibit […]

Read More

Board Level Shielding Cans

17 July 2018

Custom designed shielding cans are manufactured by photo etching or stamping, which is then folded and soldered or tabbed to […]

Read More

EMI Shielded Laminates

17 July 2018

Custom designed shielding laminates are manufactured with electrically conductive metal foils laminated to another substrate often a nonconductive material such […]

Read More

Conductive Adhesive Tapes

17 July 2018

Copper and tinned copper tape is 35µ thick and aluminium 40µ thick. Tinned copper prevents oxidation of the copper and […]

Read More

Cable Shielding Jackets

17 July 2018

Kemzip is a cable screening product designed to be wrapped around cables requiring EMI/EMC protection. It is especially suitable for […]

Read More

EMI Shielded Cable Glands

17 July 2018

The EMC cable glands are manufactured in brass and consist of 4 parts. The body, cap, locknut and the mesh […]

Read More

EMI Shielded Windows

17 July 2018

Screening or shielding of optical windows is achieved by using either: very fine woven wire mesh trapped between or embedded […]

Read More

EMP Ventilation Panels

17 July 2018

EMP Ventilation panels are designed for use in electronic enclosures where good air flow is required for cooling and ventilation […]

Read More

EMI Aluminium Screen Dust Filter Ventilation Panels

17 July 2018

Aluminium screen EMI, dust filter ventilation panels are designed for use where a thin low-profile frame is required in electronic […]

Read More

Combined EMI and Dust Filter Ventilation Panels

17 July 2018

Combined EMI and dust filter ventilation panels consist of 3 layers of pleated aluminium woven mesh trapped between an expanded […]

Read More

EMI Shielding Honeycomb Ventilation Panels

17 July 2018

Aluminium honeycomb vent panels for air flow consist of an aluminium honeycomb foil held in a rigid extruded aluminium mounting […]

Read More

EMI Connector Gaskets

17 July 2018

Kemtron manufacture a range of connector gaskets to suit many standard size connectors which require an EMI shield with optional […]

Read More

Conductive Foam Sheet

17 July 2018

Conductive foam is a low density polyethylene terephthalate (PET) and polyurethane foam with a non-woven reinforcing layer on one side […]

Read More

Beryllium Copper Fingers

17 July 2018

Beryllium Copper EMI gaskets have superior mechanical spring characteristics and high electrical conductivity making them ideally suited to shielding application […]

Read More

Conductive Fabric over Foam Gaskets

17 July 2018

This product is manufactured from a synthetic polyester or nylon yarn which is plated to give electrical conductivity over the […]

Read More

Knitted Wire Mesh with an Environmental Seal

17 July 2018

Knitted wire mesh gasket strip bonded to an elastomeric environmental seal provides RFI / EMI shielding and a dust/moisture seal. […]

Read More

Elastomer Cored Knitted Wire Mesh

17 July 2018

Knitted wire mesh over an elastomer core such as neoprene, silicone or EPDM cellular profile or tube gives a soft […]

Read More

Solid Knitted Wire Mesh

17 July 2018

Kemtron has developed its knitted wire mesh production facility and expertise to enable it to produce RFI / EMI gaskets […]

Read More

Woven & Expanded Wire in Elastomers

17 July 2018

Woven aluminium wire, expanded aluminium or expanded Monel sheet, impregnated with an elastomer filler – Silicone, fluorosilicone or synthetic rubber […]

Read More

Oriented Wires in Silicone

17 July 2018

A flat, sheet material, comprising a solid silicone rubber, embedded with Monel or aluminium metal wires orientated perpendicular to its […]

Read More

Electrically Conductive Adhesives

17 July 2018

Single component RTV (room temperature vulcanising) electrically conductive silicones are available with a range of fillers including silver plated aluminium, […]

Read More

Electrically Conductive Elastomer Form in Place

17 July 2018

Kemtron Form-in-Place (FIP) Elastomer compounds are directly dispensed onto component hardware or enclosure via a pressurised fluid dispensing system on […]

Read More

Electrically Conductive Elastomer Sheet and Flat Gaskets

17 July 2018

Flat gaskets are cut from moulded sheet using state of the art reciprocation knife cutting technology or rule dies. Larger […]

Read More
  • © Kemtron Ltd 2020. All rights reserved